Ward Vacuum Regulator With Jar ( GI 100 )

GI Ward Vaccum Regulator With Jar GI 100 exporter in delhi, Ward Vaccum Regulator With Jar GI 100 manufacturer in delhi, Ward Vaccum Regulator With Jar GI 100 in delhi, Ward Vaccum Regulator With Jar GI 100 in india

REGULATOR
GI suction regulator provides reliable, safe suction in continuous flow suction procedures. It is used to remove substances from the patient`s body during surgical procedures, the vacuum regulator should be connected to a wall source of vacuum using a direct probe or through a rail system.

The unit is specifically designed to provide high flow rates with minimal restriction in the ward and operating room which require high level suction use for patients. The standard inlet connection is compatible with the BS & DIN Gas outlet, however other inlet connections are available dependent on the hospital requirement.
Ward Vacuum Regulator (Plastic Body) with 600ML,1000ML AND 2000ML OF JARS
Antibacterial Filter is also available

Material specification:

  Jar –Polycarbonate & ABS / Auto cleavable at 121 degree centigrade
  Internal metal (wet) parts- Brass
  Regulator Body – Aluminum / Plastic
  Diaphragm- Viton Rubber

Safety Features:

Fitted with Reverse flow prevention system to protect the network from contaminations

Technical Data:

Inlet Vacuum Level (Below Atmosphere)	450 mmHG (8.7 psig) Max
Controllable Valve Level (Below Atmosphere)	0-450 mmHG (0 – 8.7 psig)
Gauge range(Analog) negative pressure	0-760 mmHG (0-14.7 psig)
Flow range	0-55 Lpm(min)